C640 Thickness Tester is a high precision mechanical contact method thickness tester, which can be used for thickness measurement of films, sheeting, paper, corrugated paperboard, textiles, non-woven fabrics, and solid insulation materials, etc. Auto sampler is optional, which is designed for multiple successive points thickness measurement.
Table 1: Test Parameters Note1
|Parameter \ Model||C640M||C640H|
|Test Range (Standard)||mm||0 ~ 2||0 ~ 2|
|Test Range (Optional 1)||mm||0 ~ 6||0 ~ 6|
|Test Range (Optional 2)||mm||0 ~ 12||0 ~ 12|
|Feeding Space||mm||0 ~ 1000 (Adjustable)|
|Feeding Speed||mm/s||1.5 ~ 80 (Adjustable)|
|Additional Functions||Auto Sampler||Optional||Optional|
|DataShieldTM Note2 ||Optional||Optional|
Table 2: Technical Specifications
|Measuring Method||Mechanical Contact Method|
|Test Pressure & Contact AreaNote3||Film: 17.5±1 KPa, 50 mm2|
|Paper: 100±1 KPa (Standard) / 50±1kPa (Optional), 200mm2|
Note1: The parameters in the table are measured by professional operator in Labthink laboratory according to relative requirements for laboratory standard conditions. For extended applications, customization is available to meet the special testing requirements.
Note2: DataShieldTM provides safe and reliable data application support. Multiple Labthink instruments can share one single DataShieldTM system which can be purchase as required.
Note3: Test pressure and contact area can be selected for paper or film. There are two options for test pressure for paper, i.e. 100kPa (standard) and 50kPa(optional). For other test pressure and contact area or curved pressure foot, customizations are available.
The pre-conditioned specimen is placed on a flat test plane, the pressure foot which is paralleled to the test plane will drop down on the upper surface of the specimen with certain pressure applied on. The displacement sensor with the pressure foot will detect the space between the upper and lower surface of the specimen, which is the thickness of the specimen.
ISO 4593, ISO 534, ASTM D6988, ASTM F2251, GB/T 6672, GB/T 451.3, TAPPI T411, BS 2782-6, DIN 53370, ISO 3034, ISO 9073-2, ISO 12625-3, ISO 5084, ASTM D374, ASTM D1777, ASTM D3652, GB/T 6547, GB/T 24218.2, FEFCO No 3, EN 1942, JIS K6250, JIS K6783, JIS Z1702
Note: The described test standards should be in line with Table 1: Test Parameters.
|Basic Applications|| |
Plastic films, paper-plastic composite films, coextruded films, aluminized films, aluminum foils, aluminum foil composite films and many others
Various sorts of engineering plastics, rubber and building materials, e.g. PP, PVC and PVDC
Plastic, rubber, paper, paper-plastic composite, glass and metal packages, e.g. Coke bottles, peanut oil packages, Tetra Pak materials, vacuum bags, metal three-piece cans, plastic packages for cosmetic, soft tubes for toothpaste, jelly and yogurt cups
|Extended Applications|| |
Test seal performance of different package caps
Including solar back-sheets
Including various sorts of pipes, e.g. PPR
Test oxygen transmission rate of the whole blister packs
Test oxygen transmission rate of contact lens under service condition
This instrument can be used to test permeability of plastic fuel tanks
This instrument can be used to test oxygen transmission rate of battery plastic shell
With innovative research and development, Labthink C640 Thickness Tester uses high precision displacement sensor, supported by scientific structure and professional control technology, which makes C640 greatly improved in stability, repeatabilityNote1 and accuracy.
The instrument is featured with high efficiency and automatic design of structure, which minimize the human operation in measuring process. Intelligent controlling and data processing functions make it easy and reliable for test operation and data processing.
The instrument is embedded with Labthink’s latest operating software, which is featured with user-friendly interface, intelligent data processing, strict user management and secure data storage. It also supports Labthink exclusive DataShieldTM (Optional) which provides the users with safe and reliable management of test data and test reports.
Note: The described features should be in line with Table 1: Test Parameters.
Note1: The Repeatability refers to the repeatability within the test range.