Google
Reviews

Cooking deformation

  Some productsrequire high-temperature cooking and sterilization of the overall foodpackaging .Cooking deformation mainly refers to the packaging undergoingdeformation and performance changes during the cooking and sterilizationprocessing. Packaging of substandard quality will cause the above issues:

1) Hightemperature tolerance -such as the sealing performance before and aftercooking, to determine whether the overall sealing performance of the finishedproduct package has deteriorated after high temperature sterilization.
2) Hygienicproperties- to ensure that no toxic substances such as solvent residues migrateto the food when the packaging materials are subjected to high temperatures.
3) The rationalityof packaging design-design or select a packaging suitable for high-temperaturecooking among many packaging materials.

New

C106H Gas Permeability Tester

C106H Gas Permeability Tester is based on the differential pressure method,Six independent test cells with standard area, three times the number of test cells in traditional oxygen permeability testing instruments.

New

C206H Oxygen Transmission Rate Tester

C206H Oxygen Transmission Rate Test System is designed and manufactured based on the coulometricsensor method and conforms to ASTM D3985.

New

C306H Water Vapor Transmission Rate Test System

C306H WaterVapor Transmission Rate Test System is designed and manufactured based on infrared sensormethod and conforms to the requirements of ASTM F1249 and ISO 15106-2. 

New

C203H Oxygen Transmission Rate Tester

C203H Oxygen TransmissionRate Test System is based on Coulometric sensor metod, and is conforming to ASTM D 3985. Independent three sets of 50cm2 standard test area cells, in line with the standard requirements for parallel sample detection.

New

C303H Water Vapor Transmission Rate Test System

C303H Water Vapor Transmission Rate Test System is based on the testingprinciple of infrared water vapor sensor, it is designed and manufacturedaccording to ASTM F1249, ISO 15106-2.

New

C680M Tearing Tester

C680M Tearing Tester is suitable for testing tear resistance of film, sheet, soft PVC, PVDC,water-proof roll, woven material, polyolefin, polyester, paper, paperboard,textile and non-woven fabric, etc.


New

C650H Headspace Gas Analyzer

C650H Headspace Gas Analyzer is ofprofessional structure design and is with high-precision sensor, the O2 Contentin sealed bags, bottles, cans and other hollow packaging containers can beaccurately and conveniently determined. Meanwhile, with the selection of testaccessories, CO2 can also be tested. 

New

C670M Falling Dart Impact Tester

C670M FallingDart Impact Tester is suitable for measuring the impact mass and energy of plastic film orsheet when 50% of the sample is damaged under the impact of free falling dartat a given height.


C360H Water Vapor Transmission Rate Test System

C360 Water Vapor Transmission Rate Test System, is designed and manufactured based on the gravimetric determination method and conforms to the requirements of ASTM E96.

C390H Water Vapor Transmission Rate Test System

C390 Water Vapor Transmission Rate Test System, is designed and manufactured based on infrared sensor method and conforms to the requirements of ISO 15106-2 and ASTM F1249.

C330H Water Vapor Transmission Rate Test System

Water Vapor Transmission Rate Test System, is designed and manufactured based on the electrolytic sensor method and conforms to the requirements of ISO 15106-3.

C130H Gas Permeability Tester

C130H Gas Permeability Tester is based on the differential pressure method and Imported high precision vacuum sensor for tests of ultra-high barrier property (0.01 ~ 0.09 cm3/ m2·24h·0.1MPa) materials with high accuracy and repeatability.

C230H Oxygen Transmission Rate Test System

C230 Oxygen Transmission Rate Test System is designed and manufactured based on the coulometric sensor method (aka. equal pressure method) and conforms to ASTM D3985.

C610H Auto Tensile Tester

C610H is professionally applicable to measurement of tensile, peeling, deformation, tearing, heat sealing, adhesive, physical force as well as other properties of soft package materials, adhesives, aluminum foils, diaphragms, back sheets, non-woven fabrics, rubber and paper, etc.

FIT-01 Film Pendulum Impact Tester

FIT-01 can be used to determine impact resistance properties of pendulum of plastic films, sheets, composite films, aluminum foils and other materials in accordance with ASTM D3420.

C611M Box Compression Tester

C611M Box Compression Tester can be used to measure the compressive resistance, deformation and stacking capability of cartons, beehive crates, plastic tanks, paper tanks, paper cases, IBC tanks and other packages.

C681M Flex Durability Tester

C681M Flex Durability Tester is professionally applicable to the determination of flex durability of flexible films, composite films and coating films.