Google
Reviews

Solutions for Inspection Institutions

  Labthink provides instruments for testing packaging material thickness, water vapor transmission rate, gas transmission rate, elongation, peeling strength, tearing strength, impact, puncture, heat sealing strength, heat bonding, thermal shrinkage, cooking, leak and seal performance, torque, coefficient of friction, ink Layer adhesion fastness, abrasion resistance, initial adhesion, lasting adhesion, light transmittance/haze, solvent residue, evaporation residue, decolorization and other physical and chemical performance of packaging materials, supports quality inspection institutions to evaluate the performance of flexible packaging .

New

C106H Gas Permeability Tester

C106H, also Gas Permeability Analyzer is based on the differential pressure method,Six independent test cells with standard area, three times the number of test cells.

New

C206H Oxygen Transmission Rate Tester

C206H Oxygen Transmission Rate Tester, also Oxygen Permeability Tester is to measure OTR of packaging materials based on the coulometricsensor method and conforms to ASTM D3985.

New

C306H Water Vapor Transmission Rate Test System

C306H , also water vapor permeation tester, is used for water  vapor permeation analysis of packaging materials,  based on infrared sensor method and  ASTM F1249 and ISO 15106-2. 

New

C203H Oxygen Transmission Rate Tester

C203H, also oxygen permeation analyzer is based on Coulometric sensor metod for oxygen permeation analysis of packaging materials, conforms to ASTM D 3985. Independent three test cells.

New

C303H Water Vapor Transmission Rate Test System

C303H Water Vapor Transmission Rate Test System is based on the testing principle of infrared water vapor sensor, it is designed and manufacturedaccording to ASTM F1249, ISO 15106-2.

New

C680M Elmendorf Tear Tester

C680M Elmendorf Tear Tester is suitable for testing tear resistance of films, textiles, paper or board based on ASTM F1922.

New

C650H Headspace Gas Analyzer

C650H Headspace Gas Analyzer is used to measure O2 content in MAP packages. Meanwhile, with the selection of test accessories, CO2 can also be tested. 

New

C670M Falling Dart Impact Tester

C670M Falling Dart Impact Tester is designed to measure the impact resistance of plastic films in compliance with ASTM D1709.

C632M Hot tack Tester

C632M Hot Tack Tester is to determine hot tack seal strength tests of packaging films according to ASTM F1921.

C360H Water Vapor Transmission Rate Test System

C360H, also water vapor permeability tester, is designed and manufactured based on the gravimetric determination method and conforms to the requirements of ASTM E96.

C390H Water Vapor Transmission Rate Tester

C390, also water vapor permeation analyzer, is designed and manufactured based on infrared sensor method and conforms to the requirements of ISO 15106-2 and ASTM F1249.

C330H Water Vapor Transmission Rate Tester

C330H, also moisture vapour transmission rate tester, is designed and manufactured based on the electrolytic sensor method and conforms to the requirements of ISO 15106-3.

C130H Gas Permeability Tester

C130H, also gas permeation analyzer, is based on the differential pressure method for gas permeation tests of ultra-high barrier property materials with high accuracy and repeatability.

C230H Oxygen Transmission Rate Tester

C230 Oxygen Transmission Rate (OTR) Tester is designed and manufactured based on the coulometric sensor method (aka. equal pressure method) and conforms to ASTM D3985.

C830H Migration & Non-volatile-matter Content Tester

C830H Migration & Non-volatile-matter Content Tester, which can be widely used for determination of migration of various packaging materials for food and their products.

C640 Thickness Tester

C640 Thickness Tester is a high precision mechanical contact method thickness tester, which can be used for thickness measurement of films, sheeting, paper, corrugated paperboard, textiles, non-woven fabrics, and solid insulation materials, etc.

C610H Auto Tensile Tester

C610H , also tensile strength Tester is professionally used for tensile testing, seal strength testing, and etc for flexible materials. This tensile tester has high resolution and accracy.

C620H Friction / Peel Tester

C620H Friction / Peel Tester is used for testing the coefficient of friction and peel strength of plastic film, paper, packaging materials and more.

MXD-02 Coefficient of Friction Tester

MXD-02 Coefficient of Friction Tester is applicable to measure the static & kinetic COF of various materials. It conforms to ASTM D1894, ISO 8295.

C630H Heat Seal Tester

C630H Heat Seal Tester is applied in measuring heatsealability of a surface, or sealant layer a packing material under controlled temperature, pressure and time conditions.

C632B Hot Tack Tester

C632B Hot Tack Tester is to determine hot tack seal strength tests of packaging films according to ASTM F1921.

FIT-01 Film Pendulum Impact Tester

FIT-01 can be used to determine impact resistance properties of pendulum of plastic films, sheets, composite films, aluminum foils and other materials in accordance with ASTM D3420.

C612M Automatic Bottle Cap Torque Tester

C612M Digital Torque Tester is the first generation of automatic torque tester with manipulator to measure the application torque and removal torque of the caps of bottles, spout bags and flexible tube packages.

C631H Thermal Shrinkage Tester

C631H Thermal Shrinkage Tester is designed and developed in accordance with ISO 14616 , for determination of shrinking force, contracting force and shrinkage ratio of heatshrinkable films. 

C660M Leak and Seal Strength Tester

C660M Leak and Seal Strength Tester can used for leak test, burst test and creep test of finished packages and three-side sealed packages, based on ISO 11067, ASTM F1140 & ASTM F2054.

C660B Leak and Seal Strength Tester

C660B, also vacuum leak tester is based on ASTM D3078. Using bubble emission method, the vaccum Leak Tester can be used for gross leak test of various packages and bottles.

C611M Box Compression Tester

C611M Box Compression Tester can be used to measure the compressive resistance, deformation and stacking capability of corrugated cartons and box packages.

C681M Flex Durability Tester

C681M Flex Durability Tester (Gelbo Flex Tester)  is professionally applicable to the determination of flex durability of flexible films, composite films and coating films.

RT-01 Ink Rub Tester

RT-01 Ink Rub Tester is professionally applicable to the abrasion resistance test of surface coating layers of printed materials. This instrument conforms to ASTM D5264 & TAPPI T830.