C680M Tearing Tester is suitable for testing tear resistance of film, sheet, soft PVC, PVDC,water-proof roll, woven material, polyolefin, polyester, paper, paperboard,textile and non-woven fabric, etc.
Lift the pendulum to a certain height to make it have a certain potential energy; when the pendulum swings freely, it uses its own stored energy to tear the sample; the computer control system calculates the energy consumed in tearing the sample, so as to obtain the force required for tearing the sample.
ISO 6383-1-1983, ISO 6383-2-1983, ISO 1974, GB/T 16578.2-2009, GB/T 455, ASTM D1922, ASTM D1424, ASTM D689, TAPPI T414
|Air Source Pressure||0.6 MPa (supplied by user)|
|Air Connection||Φ 4 mm polyurethane pipe|
|Dimensions||480 mm (L) × 380 mm (W) × 560 mm (H)|
|Mainframe Power Supply||220VAC 50Hz / 120VAC 60Hz|
|Net Weight of Mainframe||40kg (200gf basic pendulum)|
|Standard configuration||Mainframe, 1 Basic pendulum, 1 calibration weight, professional software, communication cable|
|Options Notes3||Basic pendulum: 200gf, 1600gf|
Weight gain: 400gf, 800gf, 3200gf, 6400gf
Calibration weights: 200gf, 400gf, 800gf, 1600gf, 3200gf, 6400gf
|Notes||The air source interface of the machine is Φ 4 mm polyurethane pipe; the air source is provided by the user|
Note 1: The product functions, reference standards and configuration information are subject to the specific marks in the "technical indicators".
Note 2: The parameters in the table are measured by professional operators in Labthink laboratory according to the requirements and conditions of relevant laboratory environmental standards.
Note 3: "basic pendulum" should select at least one pendulum capacity, "correction weight" should be consistent with the pendulum capacity, and it should be noted when placing an order.