RT-01 Rub Tester is professionally designed for the abrasion resistance test of surface coating layers of printed materials, e.g. ink layer or photosensitive (PS) coating. This instrument could effectively analyze the problems of poor abrasion resistance, ink layer falling off and poor hardness of coating layers of printed materials.
Features of Ink Rub Tester
4 test modes of dry rub, wet rub, wet transfer, and wet smear and 4 different test speeds to meet different test requirements
Dual stations with arc movement structure can test equivalent or distinct specimens simultaneously
Intelligent design of power failure memory and buzzer reminding ensure the safety of test operation
The instrument is controlled by micro-computer, with PVC operation panel, LCD and menu interface, which is convenient for users to operate or view the test data
This test instrument conforms to the standard: ASTM D5264, TAPPI T830
RT-01 Ink Rub Tester is applicable to the determination of abrasion resistance of:
Paper Printing Materials Test the abrasion resistance of ink layers of printed materials and effectively analyze the problems of poor abrasion resistance and ink layer falling off
Photosensitive Coating Layers Test the abrasion resistance of photosensitive coating layers and effectively analyze the problems of lower printing force of PS boards.
RT-01 Ink Rub Tester
8.9 N(2lb); 17.8N(4lb)
21, 42, 85, 106 cpm
Arc Reciprocating Movement
0 ~ 999999
Number of Specimens
1 ~ 2
220VAC 50Hz / 120VAC 60Hz
485 mm (L) x 390 mm (W) x 230 mm (H)
Instrument, 8.9N (2lb) Test Block, 17.8N (4lb) Test Block and Rubber Cushion
The headquarters of Labthink is in Jinan, China; its international headquarters is in Boston, USA. Labthink has more than 50 international distributors and more than 30 international service providers.